Well, today I will find out what is the problem for sure, I took the comp to the shop, they should tell me at the end of the day. I still think its something to do with the vid card. Here is what the code may mean:
Quote

When I power on the system, it keeps beeping like siren. What is wrong?
The beep indicates hardware monitoring error. Please first make sure the CPU fan connector is correctly plugged into the CPU fan connector, because the CPU fan speed detection is enabled by default BIOS setting; therefore, if no CPU fan is connected to the CPU fan connector, it will beep to warn user. The CPU fan speed threshold set in the BIOS (with date code 12/29/99 or later) is 4000rpm when a CPU with speed 700MHz or higher is used; Otherwise, the threshold is set at 3000rpm. Please check if you are using a CPU fan with proper RPM value on K7M M/B.





But I will find out for sure later on today, so I will post the results.

Thanks again for all your help everyone. <img src="/ubbthreads/images/graemlins/wave.gif" alt="" />



"THE WAY TO DO IS TO BE"