Larian Banner: Baldur's Gate Patch 9
Previous Thread
Next Thread
Print Thread
Page 1 of 2 1 2
Joined: Oct 2015
Z
Zyra123 Offline OP
stranger
OP Offline
stranger
Z
Joined: Oct 2015
Please help! I had no problems playing Divinity Original Sin. Now I am trying to play the enhanced edition and I keep getting this error on game launch: Failed to create rendering device! Here are my computer specs below! Greatly appreciate your help!

Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.150928-1507)
Language: English (Regional Setting: English)
System Manufacturer: Alienware
System Model: Aurora
BIOS: Default System BIOS
Processor: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz (8 CPUs), ~2.8GHz
Memory: 24566MB RAM
Available OS Memory: 24566MB RAM
Page File: 8725MB used, 40406MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 64bit Unicode

------------
DxDiag Notes
------------
Display Tab 1: No problems found.
Display Tab 2: No problems found.
Sound Tab 1: No problems found.
Sound Tab 2: No problems found.
Sound Tab 3: No problems found.
Sound Tab 4: No problems found.
Input Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)

---------------
Display Devices
---------------
Card name: NVIDIA GeForce GTX 460
Manufacturer: NVIDIA
Chip type: NVxx
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0E24&SUBSYS_083D10DE&REV_A1
Display Memory: 4051 MB
Dedicated Memory: 979 MB
Shared Memory: 3072 MB
Current Mode: 1920 x 1080 (32 bit) (60Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: VW246
Monitor Id: ACI24F2
Native Mode: 1920 x 1080(p) (60.000Hz)
Output Type: DVI
Driver Name: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver File Version: 10.18.0013.5850 (English)
Driver Version: 10.18.13.5850
DDI Version: 9Ex
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 10/3/2015 01:06:17, 15716648 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B71E3E-4D64-11CF-B465-30281CC2C735}
Vendor ID: 0x10DE
Device ID: 0x0E24
SubSys ID: 0x083D10DE
Revision ID: 0x00A1
Driver Strong Name: oem74.inf:NVIDIA_Devices.NTamd64.6.1:Section002:10.18.13.5850:pci\ven_10de&dev_0e24&subsys_083d10de
Rank Of Driver: 00E60001
Video Accel:
Deinterlace Caps: n/a
D3D9 Overlay: Supported
DXVA-HD: Supported
DDraw Status: Not Available
D3D Status: Enabled
AGP Status: Not Available

Card name: NVIDIA GeForce GTX 460
Manufacturer: NVIDIA
Chip type: NVxx
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0E24&SUBSYS_083D10DE&REV_A1
Display Memory: 4051 MB
Dedicated Memory: 979 MB
Shared Memory: 3072 MB
Current Mode: 1920 x 1080 (32 bit) (60Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: VW246
Monitor Id: ACI24F2
Native Mode: 1920 x 1080(p) (60.000Hz)
Output Type: DVI
Driver Name: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver File Version: 10.18.0013.5850 (English)
Driver Version: 10.18.13.5850
DDI Version: 9Ex
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 10/3/2015 01:06:17, 15716648 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B71E3E-4D64-11CF-B465-30281CC2C735}
Vendor ID: 0x10DE
Device ID: 0x0E24
SubSys ID: 0x083D10DE
Revision ID: 0x00A1
Driver Strong Name: oem74.inf:NVIDIA_Devices.NTamd64.6.1:Section002:10.18.13.5850:pci\ven_10de&dev_0e24&subsys_083d10de
Rank Of Driver: 00E60001
Video Accel:
Deinterlace Caps: n/a
D3D9 Overlay: Supported
DXVA-HD: Supported
DDraw Status: Not Available
D3D Status: Enabled
AGP Status: Not Available

-------------
Sound Devices
-------------
Description: Speakers (Realtek High Definition Audio)
Default Sound Playback: Yes
Default Voice Playback: No
Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_102802F7&REV_1001
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: RTKVHD64.sys
Driver Version: 6.00.0001.6039 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 2/2/2010 18:36:58, 2263584 bytes
Other Files:
Driver Provider: Realtek Semiconductor Corp.
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No

Description: Speakers (4- USB PnP Sound Device)
Default Sound Playback: No
Default Voice Playback: Yes
Hardware ID: USB\VID_0D8C&PID_013C&REV_0100&MI_00
Manufacturer ID: 65535
Product ID: 65535
Type: WDM
Driver Name: USBAUDIO.sys
Driver Version: 6.01.7601.18208 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 7/12/2013 06:40:58, 109824 bytes
Other Files:
Driver Provider: Microsoft
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No

Description: Realtek Digital Output (Realtek High Definition Audio)
Default Sound Playback: No
Default Voice Playback: No
Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_102802F7&REV_1001
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: RTKVHD64.sys
Driver Version: 6.00.0001.6039 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 2/2/2010 18:36:58, 2263584 bytes
Other Files:
Driver Provider: Realtek Semiconductor Corp.
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No

Description: Realtek HDMI Output (Realtek High Definition Audio)
Default Sound Playback: No
Default Voice Playback: No
Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_102802F7&REV_1001
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: RTKVHD64.sys
Driver Version: 6.00.0001.6039 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 2/2/2010 18:36:58, 2263584 bytes
Other Files:
Driver Provider: Realtek Semiconductor Corp.
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No

Last edited by Zyra123; 28/10/15 02:05 AM.
Joined: Oct 2015
B
stranger
Offline
stranger
B
Joined: Oct 2015
I have the exact same problem! So frustrating. I've got all the latest drivers installed and Divinity Original Sin worked fine on my computer before - just not the Enhanced Edition for some reason. My error message says:
"Failed to create rendering device!
The application failed to create the rendering device. Please make sure you meet the minimum specifications! (DX11 Compatible GPU with the latest drivers installed)"

Joined: Oct 2015
T
stranger
Offline
stranger
T
Joined: Oct 2015
Having the same exact problem and message here. No problems playing the original, I have DX 11, and all specs seem up to spec as it were. Gotta get my Divinity fix! ;)

Joined: Sep 2015
Location: Poland
apprentice
Offline
apprentice
Joined: Sep 2015
Location: Poland
Looks like drivers report DDI incorrectly: instead of '11' you get '9Ex'. This might cause the game to falsely assume that your card isn't DX11 compatible.

Joined: Oct 2015
M
stranger
Offline
stranger
M
Joined: Oct 2015
And how to fix that Thiev ?

I have the same problem also. Before, Divinity Worked just fine on my computer. But This "Enhanced Edition" dont seems to follow her older sister version of the game.

[img]http://hpics.li/f62f298[/img]

Last edited by Matiuss Neban; 28/10/15 09:56 AM.
Joined: Sep 2015
Location: Poland
apprentice
Offline
apprentice
Joined: Sep 2015
Location: Poland
Originally Posted by Matiuss Neban
And how to fix that Thiev ?

I have the same problem also. Before, Divinity Worked just fine on my computer. But This "Enhanced Edition" dont seems to follow her older sister version of the game.


The first step is to find out the cause and there can be several:

1) the card might not fully support DX11 - remember, that this line of DXDIAG: 'DirectX Version: DirectX 11' only tells you that DX11 is present in OS, not that your card supports it; make sure that your GPU is fully compatible with DX11 (it should be in tech specs / manual)

2) the card is OK but the Windows causes problems - there is a hotfix that might help (here: https://support.microsoft.com/en-us/kb/975243) but no guarantees

3) card and OS is OK but the graphic drivers report DDI falsely - that unfortunately can vary from manufacturer to manufacturer and your best bet is to Google Search similar problems (googling 'DX11 DDI problem' returns significant amount of hits)

Joined: Oct 2015
M
stranger
Offline
stranger
M
Joined: Oct 2015
I have the Nvidia 610M and on their website this card is compatible directx11 even the 12

http://www.geforce.com/hardware/notebook-gpus/geforce-610m

I tried your Hotfix, but it say that it doesnt apply on my computer.

Last edited by Matiuss Neban; 28/10/15 12:40 PM.
Joined: Oct 2015
D
stranger
Offline
stranger
D
Joined: Oct 2015
I have the same problem. Have tried the usual. I would hate to yet again buy upgrade for my PC to play one game. I'm getting too old for this. Remember disabling autoexec.bat to play Doom.......
Disappointing that same specs not used.

Joined: Mar 2003
Location: Canada
Support
Offline
Support
Joined: Mar 2003
Location: Canada

Monitor drivers can also cause this problem. Check if there is an updated inf file for your make and model of monitor, especially if Windows just has it listed as a generic PnP monitor.

Joined: Mar 2003
Location: Canada
Support
Offline
Support
Joined: Mar 2003
Location: Canada

A clean re-install of graphics drivers may help.

There are also programs that may lock the DDI to a lower version. For example one person online had a problem with a USB adapter / receiver designed to let them connect their monitor wirelessly. An Asus overclocking tool can also be at fault (Directx 11 and DDI 9Ex error - solution for ASUS cards).

Joined: Oct 2015
M
stranger
Offline
stranger
M
Joined: Oct 2015
I have an Acer Notebook Aspire 7739G, i tried to force the game to launch using DXcpl.exe. This video explain how use that.

https://www.youtube.com/watch?v=w-qsPyZfAJw

But the frame rate is so low, it is impossible to play, even in windowed mode. With the lowest resolution

http://hpics.li/b45a256




Joined: Oct 2015
I
stranger
Offline
stranger
I
Joined: Oct 2015
Hi,

I have the same technical issue even after reinstalling drivers (monitor / graphic / direct X11 / windows up to date)

my PC configuration is :
- Win 7 pro 64x
- Intel Core i3 4130 @ 3.40GHz
- 4,00 Go Canal-Simple DDR3 @ 798 MHz
- ASUSTeK COMPUTER INC. H81M-C (SOCKET 1150)
- 512 MoATI Radeon HD 4600 Series (MSI)

I do not find the information if my graphic card can support directX 11... :/

Can you help, please ?

Joined: Sep 2015
Location: Poland
apprentice
Offline
apprentice
Joined: Sep 2015
Location: Poland
Originally Posted by Isawamax

- 512 MoATI Radeon HD 4600 Series (MSI)

I do not find the information if my graphic card can support directX 11... smirk
|
It doesn't. It supports up to DX 10.1.

Joined: Oct 2015
I
stranger
Offline
stranger
I
Joined: Oct 2015
And what can I do for making Divinity Original Sin enhanced edition work on this computer ?

Joined: Oct 2015
I
stranger
Offline
stranger
I
Joined: Oct 2015
Please can you be more specific on what is going on.

Do we will have to buy a new graphic card (wich will be very desapointing, because D OS "base edition" used to work on that kind of configuration) ?

Is there will be a patch for this problem ?

Are there others manipulations (like downgrad to direct X 9.0C) we can do ? and how ?

Thanks.


Joined: Mar 2003
Location: Canada
Support
Offline
Support
Joined: Mar 2003
Location: Canada

You would need to upgrade the video card to play the game in Windows. D:OS uses DirectX 9c; the EE requires hardware support for DirectX 11.

The Linux requirements have not been announced yet. It is theoretically possible the Linux version could run on your system (when it is released in December), depending on what version of OpenGL is required, and assuming you are willing to dual boot. Given the increased feature set in DirectX 11, though, a corresponding increase in OpenGL requirements wouldn't be surprising.

Joined: Feb 2016
S
stranger
Offline
stranger
S
Joined: Feb 2016
I have a nvidia 980 and I am getting the same error. I'm sure for some people it is an incompatible graphics card or driver or what not. But I'm all set up for dx11 and still the same error. The internet is kind of dry on this error. My game starts though and randomly at about 20 minutes or so I get that error. No matter what that error shows up in game no matter what is happening in the game. I'm drunk and I neeeeed divinity. Help the drunk guy. My computer rules it's new and was a 2 grand machine. So I meet the specs. but oh the drunkness

Joined: Mar 2003
Location: Canada
Support
Offline
Support
Joined: Mar 2003
Location: Canada

Have you tried other DirectX 11 games? This could be a hardware issue (in which case other, similarly demanding games should also be affected), or a driver problem.

Check for updated graphics drivers and Windows updates in general.

If you check the Event Viewer, does that give an error code or 'Faulting Module' file name that might help identify the cause of the crash?
- click Start (or WinKey-R), then type "event viewer" into the search box. in Windows 10, 'event' should bring up 'View event logs'.
- after starting the Event Viewer, expand 'Windows Logs' in the left column and select 'Application'
- in the center column, look for a recent error (maybe sort by Date and Time) for the game
- check the information under the 'General' tab below the list of events, starting with "Faulting application name..."

Especially if the faulting module name is something graphics related, you can try a clean re-install of the nvidia graphics drivers. See here or here, for example.

Joined: Feb 2016
S
stranger
Offline
stranger
S
Joined: Feb 2016
Yes All my other directx 11 games work fine. I did what you said. It says this.


Faulting application name: EoCApp.exe, version: 2.0.104.737, time stamp: 0x567ab9f5
Faulting module name: EoCApp.exe, version: 2.0.104.737, time stamp: 0x567ab9f5
Exception code: 0xc0000005
Fault offset: 0x0000000001047e81
Faulting process id: 0x6ec
Faulting application start time: 0x01d16c51fdc9c6ea
Faulting application path: C:\Program Files (x86)\Steam\steamapps\common\Divinity Original Sin Enhanced Edition\Shipping\EoCApp.exe
Faulting module path: C:\Program Files (x86)\Steam\steamapps\common\Divinity Original Sin Enhanced Edition\Shipping\EoCApp.exe
Report Id: b9148b02-7eb3-4416-b2fe-1132adf99c2e
Faulting package full name:
Faulting package-relative application ID:

The event viewer said the source of the error was the application. Does that mean I should wait for an update? or is there something I can do?

Last edited by starblind; 21/02/16 03:18 AM.
Joined: Mar 2003
Location: Canada
Support
Offline
Support
Joined: Mar 2003
Location: Canada

The exception code c0000005 is a memory access violation, but there are a variety of possible causes. If the faulting module name was something else it could narrow down the source of the problem, but unfortunately since it is the game executable, it isn't very helpful.


Please email supportdos@larian.com, with a description of the problem (or link to this topic) and the report.zip file (or a Dropbox or Google drive link, etc) generated by the D:OS EE Analysis Tool (for Windows).
Extract the zip file somewhere and run AnalysisTool.exe. When that loads, browse to the install folder (if it is not automatically detected), optionally run the tests first, and then generate a report (it will be saved in the same location as the Analysis Tool).

The report will contain system and game information, as well as your saved games. To reduce the file size, you can delete all but one of the saves from the zip.

Also check the '..\Divinity Original Sin Enhanced Edition\Shipping' folder for any CrashDump files, and either add a couple to the report.zip file, or zip them separately.

Page 1 of 2 1 2

Moderated by  gbnf, Issh, Kurnster, Larian_QA, LarSeb, Monodon, Raze 

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5